#define LED_L 10
#define DelayTime 2
#define ROW 8
#define COL 3
#define G1 13
#define X 6 //4 張圖
#define Y 10 //1 張圖停留時間

const int scan[COL] = {10,11,12};
const int row[ROW] = {2,3,4,5,6,7,8,9};
const int mapR[X*ROW]={0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,
                  0x00,0x00,0x3C,0x24,0x24,0x3C,0x00,0x00,
                  0x00,0x7E,0x42,0x42,0x42,0x42,0x7E,0x00,
                  0xFF,0x81,0x81,0x81,0x81,0x81,0x81,0xFF,
                  0x00,0x7E,0x42,0x42,0x42,0x42,0x7E,0x00,
                  0x00,0x00,0x3C,0x24,0x24,0x3C,0x00,0x00};

void setup() {
  for (int i = 0;i<COL;i++) pinMode(scan[i], OUTPUT);
  for (int i = 0;i<ROW;i++) pinMode(row[i], OUTPUT);
  pinMode(G1, OUTPUT);
}

void loop() {
  int i, j, k, u, t,x, p, f;
  for(x=0;x<X;x+=((++f%Y)==0)){
    for(i=LOW;i<=HIGH;i++)
      for(j=LOW;j<=HIGH;j++)
        for(k=LOW;k<=HIGH;k++){
          digitalWrite(G1,LOW);
          digitalWrite(scan[0],k);
          digitalWrite(scan[1],j);
          digitalWrite(scan[2],i);
          p = (x*ROW) + ((i*4) + (j*2) + k); 
          for(u=0,t=1;u<ROW;u++,t<<=1)
             digitalWrite(row[u],mapR[p] & t);
          digitalWrite(G1,HIGH);
          delay(DelayTime);
       }
  }
}